Water heaters are one of the most important appliances in our homes. Not only do they provide us with hot water, but they also keep our families safe by preventing frozen pipes in the winter. While water heaters are fairly reliable appliances, they do need some regular maintenance to keep them running at their best. To make sure your water heater is always in the best condition, make sure to contact a plumber Brisbane North to keep your heater in an optimal state.
In this article, we will discuss some of the ways you can maintain your water heater and extend its life.
Another way to maintain your water heater is to check the anode rod. This is a metal rod that helps protect the tank from corrosion. If the anode rod is corroded, it will not be able to do its job, and the tank will eventually rust. You can check the anode rod by removing it from the tank and inspecting it for signs of corrosion. If it is corroded, you can replace it yourself or have a professional do it for you.
One of the simplest ways to maintain your water heater is by routinely checking the pressure relief valve. This valve helps release excess pressure that can build up inside the tank. If this valve becomes clogged or stuck, it can cause the tank to overheat and potentially rupture.
Most people don’t think about their water heater until it stops working, and then they have to scramble to find someone to fix it. But with a little bit of regular maintenance, you can help your water heater last longer and work more efficiently. Here are 15 ways to maintain your water heater:
1. Drain the sediment from the bottom of your tank every 3-6 months. This can be done with a hose attached to the drain valve at the bottom of the tank.
2. Flush out your hot water tank every year to clean deposits that may have built up. You can do this by attaching a garden hose to the drain valve and running it until the water runs clear.
3. Inspect your thermostat and heating element every year and replace them if necessary.
4. Make sure the water pressure coming into your tank is between 40 and 80 psi. If it's not, you may need to adjust your water pressure regulator.
5. Keep the area around your water heater clear of combustible materials like newspapers, cardboard boxes or rags.
6. Replace any old or leaky piping with new copper piping.
7. Insulate your hot water tank and pipes to help conserve energy.
8. Check the valves and fittings on your water heater for leaks regularly.
9. Have your gas lines inspected by a professional every year.
10. Never store flammable liquids near your water heater.
11. Keep the temperature on your water heater set to between 120 and
140 degrees Fahrenheit.
12. If you have a tankless water heater, make sure the flow rate is appropriate for your needs.
13. Replace any old or damaged insulation around your tankless water heater.
14. Periodically clean the filters on your tankless water heater.
15. If you're not using your tankless water heater, turn it off.
Maintaining your water heater is an important part of keeping your home running smoothly. By following these simple tips, you can increase the life span of your water heater and avoid any unexpected breakdowns.
