9 Common Automatic Garage Door Problems And Their Solutions

If your garage doors Sydney isn't working properly, it can be a major inconvenience. Not being able to get your car out of the garage can make it difficult to get to work or run errands. Luckily, there are some simple things you can do to try and fix the problem. 

The following list goes over some of the most common automatic garage door problems and how they can be resolved.

The garage door won't open or close

If your garage door won't open or close, the first thing you should check is the power supply. Make sure that the garage door opener is plugged into an outlet and that the circuit breaker hasn't been tripped. If everything looks fine with the power supply, then the problem may be with the garage door opener itself. Try pressing the reset button on the opener. If that doesn't work, you may need to replace the opener.

The garage door opens or closes by itself

If your garage door starts opening or closing by itself, there may be something wrong with the sensors. The sensors are located at the bottom of the garage door and prevent it from closing if something is in the way. Sometimes dirt or debris can build up on the sensors and cause them to malfunction. Cleaning the sensors should fix the problem.

The garage door reverses when it's trying to close

If your garage door starts to close and then abruptly reverses, it could be because something is blocking the sensors. Again, you'll want to check the sensors and make sure they're clean. Another possibility is that the springs are too tensioned. The springs help balance the door and keep it from closing too quickly. If they're too tensioned, they can cause the door to reverse.

The garage door opener remote doesn't work

If your garage door opener remote suddenly stops working, there are a few things you can try. First, check the batteries. If they're dead, replace them and see if that fixes the problem. If the remote still doesn't work, there may be something wrong with the opener itself. Try pressing the reset button on the opener. If that doesn't work, you may need to replace the opener.

The garage door won't open or close from the outside

If you can't open or close your garage door from the outside, the problem may be with the keypad. The keypad is located on the outside of the garage and is used to enter a code that opens the door. If the keypad isn't working, you may need to replace it.

The garage door opener makes a lot of noise

If your garage door opener starts making a lot of noise, there are a few things you can try. First, check to see if anything is blocking the tracks. Sometimes dirt and debris can build up on the tracks and cause the opener to make noise. Cleaning the tracks should fix the problem. If the tracks are clear, then the problem may be with the opener itself. Try pressing the reset button on the opener. If that doesn't work, you may need to replace the opener.

The garage door falls down when it's trying to close

If your garage door starts to close and then falls down, there may be something wrong with the springs. The springs help balance the door and keep it from closing too quickly. If they're broken or worn out, they can cause the door to fall. You'll need to replace the springs to fix the problem.

The garage door won't stay open

If your garage door won't stay open, there may be something wrong with the opener. Try pressing the reset button on the opener. If that doesn't work, you may need to replace the opener.

The garage door is off track

If your garage door is off track, it can cause a lot of problems. The first thing you should do is try to realign the tracks. If that doesn't work, you'll need to call a professional to fix the problem.

These are just some of the most common problems that people have with their garage doors. If you're having trouble with your door, make sure to check these things first. You may be able to fix the problem yourself without calling a professional.

But if the issue persists, it is best to get in touch with a professional. These people have the equipment and skills needed to diagnose the problem and fix it quickly.